Full Brochure PDF
Full Brochure

     Sucker Rods, Drive Rods® and Accessories        

Norris Steel Sucker Rods, Drive Rods® and Pony Rods are manufactured at Alberta Oil Tool from micro-alloyed, modified special quality hot rolled carbon or steel bars. Bar and sucker rod dimensions and tolerances conform to API (American Petroleum Institute) Specification 11B, latest edition.

  • Sucker rods are available in 5/8” (15.88mm), 3/4” (19.05mm), 7/8” (22.23mm), 1” (25.40mm) and 1 1/8” (28.58mm).
     
  • Drive Rods® for Progressing Cavity Pump applications are available in 1” (25.40mm), 1 1/4” (31.75mm) and 1 1/2” (38.10mm) body diameter. 
     
  • Pony Rods are also available in 1ft. (0.30m), 2ft. (0.61m), 4ft. (1.22m), 6ft. (1.83m), 8ft. (2.44m), 10ft. (3.05m) and 12ft. (3.66m) lengths.

 

 

Practice 11B Table A.4 - Chemical Composition of Steel Rods
API Grade Chemical Composition
K AISI 46XX Series Steel
C AISI 10XX Series Steel
  AISI 15XX Series Steel
D Carbon AISI 10XX Series Steel
  AISI 15XX Series Steel
D Alloy AISI 41XX Series Steel
D Special Special*
*Special Alloy shall be any chemical composition containing a combination of Nickel, Chromium, and Molybdenum that total a minimum of 1.15 % alloying content.
Practice 11B Table A.5 - Chemical Composition of Steel Rods
API Min.Yield .02%
offset
Min.Tensile Max. Tensile
Grade psi mPa psi mPa psi mPa
K 60,000 414 90,000 621 115,000 793
C 60,000 414 90,000 621 115,000 793
D 85,000 586 115,000 793 140,000 965
9530 - 60th AVENUE, EDMONTON, ALBERTA T6E 0C1 (780) 434-8566 FAX (780) 436-4329  
ISO 9001:2008, API Q1 registered. API 5CT, 11AX, and 11B licensed.